Epoxology CanadaRequest an Assessment

Flooring Education

Epoxology Learning Centre

Learn how resinous floors are specified, prepared and installed. Start with the question you need answered for your facility, garage or basement.Browse the lessonsFlooring glossary

Finished grey epoxy floor in an Epoxology warehouse project in Vaughan
Finished epoxy flooring at the Vaughan warehouse.

Browse the Curriculum

Open a section or search lessons and glossary terms.

Start Here

Learn how resinous coatings work and compare the main flooring options.

5 lessons

Coating Fundamentals

How Resinous Coatings Cure

Follow a two-part coating from mixing to full cure and learn how to read pot life, recoat windows and traffic release times.

Assess And Prepare The Slab

Check the slab and choose the right preparation before coating.

6 lessons

Moisture And Testing

Concrete Moisture Before Epoxy

What slab moisture tests measure, how condensation differs, and what to ask about moisture mitigation.

Concrete Preparation

Concrete Cracks And Joints

Know what to ask about cracks, saw-cut control joints and isolation joints before a resinous floor is installed.

Specify And Plan The Installation

Match the floor to its use, then plan the installation and scope.

8 lessons

Finish Selection

Slip Resistance And Floor Texture

Compare three resinous floor textures and learn what to specify for a washdown aisle or a garage that gets wet in winter.

System Specification

Chemical And Heat Exposure

Map where chemicals and heat reach a resinous floor and turn those conditions into a written specification.

Washdown Floor Design

Floor Drains, Slopes And Cove Base

Plan how wash water reaches drains and how a resinous floor meets walls and doorways, with a worked food-processing example.

Care For And Troubleshoot The Floor

Plan reopening, maintain the finish and assess problems when they appear.

4 lessons

Installation And Handover

Cure Times And Return To Service

Plan when people, vehicles and cleaning crews can return to a newly coated floor, with warehouse and winter garage examples.

Troubleshooting

Why Resinous Floors Fail

Recognize peeling, blisters and cracks, document what changed, and understand what an installer checks before recommending a repair.

Flooring Glossary

Open a term for a quick definition and a lesson that explains it in context.

Aggregate

Granular material, such as sand or quartz, added to a coating system to build thickness or create surface texture, depending on the system.

Slip Resistance And Floor Texture

Broadcast

To spread flakes or aggregate over a wet coating so the material becomes part of the finished floor.

How A Resinous Floor Is Installed

Cove base

A curved transition where the floor meets the wall. It replaces the sharp inside corner with a surface that is easier to reach during cleaning.

Floor Drains, Slopes And Cove Base

Dew point

The temperature at which air reaches saturation. Moisture can condense when that air meets concrete at or below this temperature.

Back to lesson: Dew Point And Condensation Before Coating

Full cure

The stage when a coating reaches its stated cured properties under the specified conditions. A floor can be ready for some uses earlier.

Cure Times And Return To Service

Moisture-vapour barrier (MVB)

A treatment applied to concrete to reduce the amount of moisture vapour that passes through to the coating above. Check what the selected product is designed to handle.

Back to lesson: Concrete Moisture Before Epoxy

Outgassing

Air escaping from pores in concrete. If it passes through a wet coating, it can form bubbles that leave pinholes.

Outgassing And Pinholes In Resinous Floors

Pot life

How long a mixed coating stays usable under the stated conditions. The clock starts when you combine the components.

Back to lesson: How Resinous Coatings Cure

Primer

A first coat used to prepare the surface for the next layer. Its purpose depends on the product and flooring system.

How A Resinous Floor Is Installed

Recoat window

The time between the earliest and latest points at which you can apply the next coat under the stated conditions. A missed window can require extra preparation.

Back to lesson: How Resinous Coatings Cure

Substrate

The surface receiving the flooring system. On many resinous flooring jobs, that surface is the prepared concrete slab.

Choosing A Resinous Flooring System

Wet-film thickness

The thickness of a coating layer just after application, while it is still wet. It is measured separately from the finished system thickness.

How Thick Should A Resinous Floor Be?

Request an Assessment
Call +1 (905) 840-8405
↑