Epoxology CanadaRequest an Assessment
Back to Learning Centre

System Selection

Polished Concrete vs. Resinous Flooring

Compare the two finishes by slab condition, traffic, spills, cleaning and downtime, with a warehouse and vehicle service bay example.

Warehouse aisle with exposed-aggregate polished concrete beside a uniformly coated vehicle service bay
Illustration. A polished warehouse aisle beside a coated service bay.

The Short Answer

Start by assessing the slab and how each area will be used. Polishing refines the concrete surface itself. A resinous system adds a coating assembly over a prepared slab. Compare both against the conditions in each zone before asking for a price.

Compare The Two Finishes

Labelled cross-sections show the mechanically refined surface of polished concrete and an example of a resinous coating with primer, body coat and finish above prepared concrete. Polished concrete Refined slab surface Concrete slab Resinous flooring Finish coat Body coat Primer Prepared concrete
Illustrative cross-sections. Exposure of aggregate varies with the polishing specification. The resin layers are an example and vary by system. Open Full-Size Diagram

Polished Concrete

Ask how the existing slab will look after polishing, including repairs, stains and differences in aggregate exposure. Use a representative mock-up to agree on the appearance and finish.

Resinous Flooring

Ask for the named system, preparation, moisture criteria, texture and written compatibility with actual spills and cleaners. Confirm release times for each type of traffic.

Worked Example: Warehouse Aisle And Service Bay

A facility has a dry warehouse aisle with routine forklift traffic and a separate service bay with recurring oil and coolant drips. The manager marks turning points, joints and repair areas in both zones, then records what spills in the service bay and how long it usually stays on the floor.

Warehouse aisle. Polishing could suit this zone if the slab and mock-up meet the traffic, appearance and cleaning requirements. Ask the polishing contractor to price repairs, edge work and the expected appearance of existing patches.

Service bay. Compare a resinous system specified for the actual fluids and cleanup process. Ask for written compatibility for the finish, the proposed texture, and the release times for vehicles and cleaning. Review the transition between the two floors as part of the same scope.

What To Ask For In Each Quote

  • The condition of the slab in each zone and which repairs, edges and transitions are included.
  • The finish or coating build, representative sample area and acceptance criteria.
  • The cleaning method, expected exposure and any exclusions.
  • The work phases, closure windows and approval needed before reopening.

See Chemical And Heat Exposure for documenting spills and How To Compare Commercial Flooring Quotes for putting both bids on the same scope.

Technical References

  • ACI / ASCC Specification For Polished Concrete Slab Finishes
  • Example Product Documentation For Resinous Floor Exposure Limits

Related Lessons

Request an Assessment
Call +1 (905) 840-8405
↑