Foundation Crack Repair & Polyurethane Injection | Epoxology Skip To Content
Epoxology CanadaRequest an Assessment
Southern Ontario · Homes And Commercial Properties

Foundation Crack Repair And Polyurethane Injection

Target the crack. Understand the source of the leak.

Epoxology Canada provides foundation crack assessments and polyurethane injection for suitable leaking concrete foundation walls across the GTA and Southern Ontario.

We welcome homeowners, property managers and commercial building owners. We review the visible crack, access and moisture conditions before confirming whether injection is appropriate.

Interior wall diagram showing a continuous surface seal, bonded injection ports and an injection hose
Interior view: white injection ports bonded over a grey surface cap. The hose connects to the lower port.

Start With The Crack And The Source Of Water

Leaking Concrete Wall Cracks

Identify where water is entering and review the exposed concrete, crack pattern and any previous patching before selecting a repair.

Access And Building Use

Plan around basement finishes, equipment, storage and occupied areas. Confirm what needs to be exposed and protected before work begins.

The Right Repair Scope

Cracks with displacement, continuing movement or other structural concerns need further evaluation. Leakage from a joint or another source may need a different solution.

Top View: Looking Down Through The Foundation Wall

Imagine slicing horizontally through the wall at one injection port, then looking straight down. The drawing shows the wall’s thickness, with the outside on the left and the inside of the basement or room on the right.

TOP VIEW — LOOKING DOWNHorizontal slice through the foundation wall
OUTSIDEMoisture sideINSIDEBasement / room
Rendered top-down cutaway of concrete wall showing amber polyurethane within a thin crack, a grey surface cap and a white injection port connected to a black hose on the inside
Viewed from above. Injection travels from the room side into the wall through the port. Numbered explanations are below.
  1. Polyurethane inside the crack. The selected injection resin travels into the leakage path; suitable formulations expand and cure within the crack.
  2. Surface-sealing paste. A continuous cap across the room-side face helps contain resin and resist it escaping back out of the exposed crack.
  3. Bonded injection port. The port is attached over the crack with a compatible adhesive, leaving a passage into the crack.
  4. Controlled inward flow. The injection hose feeds resin through the port. The cap and bonded ports help direct it into the wall rather than simply foaming out of the face.

Two Materials, Two Different Jobs

Surface cap: a compatible surface-sealing paste, such as an epoxy or polyurea paste specified for the injection system. It is separate from the injected foam.

Inside the crack: the selected polyurethane injection resin, which can expand and cure within the leakage path. Actual resin behaviour and the required preparation depend on the product and wall conditions.

Foundation Crack Injection: Five Distinct Stages

Attaching the ports and sealing the crack face are separate preparation steps. Together they help contain and direct the polyurethane injection. The method, pressure and curing requirements follow the selected repair system.

  1. 01

    Assess And Prepare The Crack

    Expose the accessible concrete, assess the leak and previous repairs, then clean and prepare the wall face for the chosen injection system.

  2. 02

    Bond The Injection Ports

    Attach each surface port over the crack with a compatible port adhesive. Secure the port bases while keeping their openings and the crack beneath them clear.

  3. 03

    Seal The Crack Face

    Apply the specified surface-sealing paste continuously over the exposed crack and around the port bases. Let it cure as required. This cap helps contain the injection and resist resin escaping from the face.

  4. 04

    Inject The Polyurethane Resin

    Connect the injection hose and introduce resin under controlled pressure. For a suitable vertical surface-port repair, work upward port by port so the material travels into the crack behind the cured surface cap.

  5. 05

    Finish And Review The Repair

    Allow the injection material to cure, then remove or finish ports and the surface seal as the system requires. Review appearance, access, care and any follow-up included in the agreed scope.

Foundation Crack Repair For Homes And Commercial Properties

Home Basements And Garages

Discuss a leaking poured-concrete foundation wall, previous patch or accessible crack before planning finishes or further renovation work.

Commercial And Managed Buildings

Plan investigation and repair access around equipment, tenants and building operations. The agreed scope identifies the area being treated.

Before A Flooring Project

Tell us about wall leaks before a floor coating is specified. A flooring moisture-vapour barrier is not a repair for a leaking foundation wall.

Crack Sealing, Structural Repair And Waterproofing

These services solve different problems. This page focuses on sealing suitable concrete-wall cracks with an injection repair. It does not promise foundation reinforcement, correction of building movement or whole-basement waterproofing.

If the assessment points to drainage, foundation movement, a floor-to-wall junction or another moisture source, the work needs a separate scope. We explain what the proposed crack repair includes and what remains outside it.

Materials, access, finish expectations and any applicable repair warranty are confirmed in the written project agreement. Flooring warranties are separate.

Foundation Crack Repair Across Southern Ontario

We welcome inquiries from the GTA and Southern Ontario. Share your address and photographs so we can confirm service availability and plan the next step.

Explore All Southern Ontario Service Areas

Foundation Crack Repair Questions And Answers

What is polyurethane foundation crack injection?

It introduces a selected polyurethane resin into a suitable concrete crack through injection ports. Some formulations expand into foam and remain flexible after curing. Material selection depends on the crack, moisture and intended repair.

Does the surface patch alone stop the leak?

The surface cap helps resist resin escaping from the exposed face during injection. Resin is introduced through the ports into the crack behind that cap. The cap and injected polyurethane are different parts of the repair; a surface patch alone is not the same treatment.

Is this a structural foundation repair?

This service focuses on crack leak sealing. Displacement, ongoing movement, bowing or structural concerns may require an engineer and a different repair plan. Injection is not a substitute for structural assessment.

Is polyurethane the same as epoxy injection?

No. The resins have different properties and applications. This service uses a selected leak-sealing polyurethane system. Epoxy injection may serve a different repair purpose when specified for the crack; neither should be confused with a floor coating.

Will this waterproof the whole basement?

No. Treating an identified crack does not repair every possible moisture source. Floor-to-wall leakage, drainage problems, plumbing leaks, exterior membranes or other defects may need separate work.

Can you repair cracks in a finished basement?

Access to the concrete crack is needed for assessment and treatment. We discuss wall finishes, stored items and reinstatement responsibilities before agreeing the scope.

How much does foundation crack repair cost?

The quotation depends on access, crack extent, previous repairs, water conditions and the proposed method. Share photographs and your location so we can discuss an assessment.

What warranty applies to crack injection?

Any repair warranty and its limits must be specified in the written foundation-repair agreement. The residential, commercial and MVB flooring-warranty periods do not automatically apply to foundation crack repairs.

Understanding The Injection Method

These manufacturer resources explain surface ports and polyurethane crack-injection principles. They are technical references, not a claim that a particular branded product is specified for every project.

Epoxology Canada logoElegance Meets Durability

Discuss Your Foundation Crack Repair

Tell us where the property is, where the crack is located and when you notice water. Include whether the concrete is accessible, whether it was repaired before and how the space is used.

+1 (905) 840-8405
sales@epoxology.ca

Repair scope, materials and any applicable warranty are confirmed in your written foundation-repair agreement. Flooring warranty periods do not automatically apply.

Request Your Assessment

Contact Form

This form is for flooring assessment requests only. Service offers and solicitations submitted here will not be processed. Please email info@epoxology.ca instead.

Privacy Policy

Call +1 (905) 840-8405WhatsApp +1 (905) 840-8405Text +1 (905) 840-8405
↑